idVendor: 0x0DB5
  iManufacturer: Access IS
 idProduct: 0x0184
  Can't get iProduct string: LIBUSB_ERROR_INVALID_PARAM
 bcdDevice: 0.18 (firmware release?)
 bLength: 9
 bDescriptorType: 4
 bInterfaceNumber: 0
 bAlternateSetting: 0
 bNumEndpoints: 3
  bulk-IN, bulk-OUT and Interrupt-IN
 bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
 bInterfaceSubClass: 0
 bInterfaceProtocol: 0
  bulk transfer, optional interrupt-IN (CCID)
 iInterface: NFC0
 CCID Class Descriptor
  bLength: 0x36
  bDescriptorType: 0x21
  bcdCCID: 1.10
  bMaxSlotIndex: 0x00
  bVoltageSupport: 0x01
   5.0V
  dwProtocols: 0x0000 0x0003
   T=0
   T=1
  dwDefaultClock: 4.000 MHz
  dwMaximumClock: 13.560 MHz
  bNumClockSupported: 0 (will use whatever is returned)
   IFD does not support GET CLOCK FREQUENCIES request: LIBUSB_ERROR_PIPE
  dwDataRate: 106000 bps
  dwMaxDataRate: 848000 bps
  bNumDataRatesSupported: 0 (will use whatever is returned)
   IFD does not support GET_DATA_RATES request: LIBUSB_ERROR_PIPE
  dwMaxIFSD: 2048
  dwSynchProtocols: 0x00000000
  dwMechanical: 0x00000000
   No special characteristics
  dwFeatures: 0x0004007A
   ....02 Automatic parameter configuration based on ATR data
   ....08 Automatic ICC voltage selection
   ....10 Automatic ICC clock frequency change according to parameters
   ....20 Automatic baud rate change according to frequency and Fi, Di params
   ....40 Automatic parameters negotiation made by the CCID
   04.... Short and Extended APDU level exchange
  dwMaxCCIDMessageLength: 2048 bytes
  bClassGetResponse: 0xFF
   echoes the APDU class
  bClassEnvelope: 0xFF
   echoes the APDU class
  wLcdLayout: 0x0000
  bPINSupport: 0x00
  bMaxCCIDBusySlots: 1
 idVendor: 0x0DB5
  iManufacturer: Access IS
 idProduct: 0x0184
  Can't get iProduct string: LIBUSB_ERROR_INVALID_PARAM
 bcdDevice: 0.18 (firmware release?)
 bLength: 9
 bDescriptorType: 4
 bInterfaceNumber: 1
 bAlternateSetting: 0
 bNumEndpoints: 3
  bulk-IN, bulk-OUT and Interrupt-IN
 bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
 bInterfaceSubClass: 0
 bInterfaceProtocol: 0
  bulk transfer, optional interrupt-IN (CCID)
 iInterface: SMC0
 CCID Class Descriptor
  bLength: 0x36
  bDescriptorType: 0x21
  bcdCCID: 1.10
  bMaxSlotIndex: 0x00
  bVoltageSupport: 0x01
   5.0V
  dwProtocols: 0x0000 0x0003
   T=0
   T=1
  dwDefaultClock: 4.000 MHz
  dwMaximumClock: 4.000 MHz
  bNumClockSupported: 0 (will use whatever is returned)
   IFD does not support GET CLOCK FREQUENCIES request: LIBUSB_ERROR_PIPE
  dwDataRate: 10752 bps
  dwMaxDataRate: 10752 bps
  bNumDataRatesSupported: 0 (will use whatever is returned)
   IFD does not support GET_DATA_RATES request: LIBUSB_ERROR_PIPE
  dwMaxIFSD: 1024
  dwSynchProtocols: 0x00000000
  dwMechanical: 0x00000000
   No special characteristics
  dwFeatures: 0x0004067E
   ....02 Automatic parameter configuration based on ATR data
   ....04 Automatic activation of ICC on inserting
   ....08 Automatic ICC voltage selection
   ....10 Automatic ICC clock frequency change according to parameters
   ....20 Automatic baud rate change according to frequency and Fi, Di params
   ....40 Automatic parameters negotiation made by the CCID
   ..02.. NAD value other than 00 accepted (T=1)
   ..04.. Automatic IFSD exchange as first exchange (T=1)
   04.... Short and Extended APDU level exchange
  dwMaxCCIDMessageLength: 1024 bytes
  bClassGetResponse: 0xFF
   echoes the APDU class
  bClassEnvelope: 0xFF
   echoes the APDU class
  wLcdLayout: 0x0000
  bPINSupport: 0x00
  bMaxCCIDBusySlots: 1
 idVendor: 0x0DB5
  iManufacturer: Access IS
 idProduct: 0x0184
  Can't get iProduct string: LIBUSB_ERROR_INVALID_PARAM
 bcdDevice: 0.18 (firmware release?)
 bLength: 9
 bDescriptorType: 4
 bInterfaceNumber: 2
 bAlternateSetting: 0
 bNumEndpoints: 3
  bulk-IN, bulk-OUT and Interrupt-IN
 bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
 bInterfaceSubClass: 0
 bInterfaceProtocol: 0
  bulk transfer, optional interrupt-IN (CCID)
 iInterface: SMC1
 CCID Class Descriptor
  bLength: 0x36
  bDescriptorType: 0x21
  bcdCCID: 1.10
  bMaxSlotIndex: 0x00
  bVoltageSupport: 0x01
   5.0V
  dwProtocols: 0x0000 0x0003
   T=0
   T=1
  dwDefaultClock: 4.000 MHz
  dwMaximumClock: 4.000 MHz
  bNumClockSupported: 0 (will use whatever is returned)
   IFD does not support GET CLOCK FREQUENCIES request: LIBUSB_ERROR_PIPE
  dwDataRate: 10752 bps
  dwMaxDataRate: 10752 bps
  bNumDataRatesSupported: 0 (will use whatever is returned)
   IFD does not support GET_DATA_RATES request: LIBUSB_ERROR_PIPE
  dwMaxIFSD: 1024
  dwSynchProtocols: 0x00000000
  dwMechanical: 0x00000000
   No special characteristics
  dwFeatures: 0x0004067E
   ....02 Automatic parameter configuration based on ATR data
   ....04 Automatic activation of ICC on inserting
   ....08 Automatic ICC voltage selection
   ....10 Automatic ICC clock frequency change according to parameters
   ....20 Automatic baud rate change according to frequency and Fi, Di params
   ....40 Automatic parameters negotiation made by the CCID
   ..02.. NAD value other than 00 accepted (T=1)
   ..04.. Automatic IFSD exchange as first exchange (T=1)
   04.... Short and Extended APDU level exchange
  dwMaxCCIDMessageLength: 1024 bytes
  bClassGetResponse: 0xFF
   echoes the APDU class
  bClassEnvelope: 0xFF
   echoes the APDU class
  wLcdLayout: 0x0000
  bPINSupport: 0x00
  bMaxCCIDBusySlots: 1
 idVendor: 0x0DB5
  iManufacturer: Access IS
 idProduct: 0x0184
  Can't get iProduct string: LIBUSB_ERROR_INVALID_PARAM
 bcdDevice: 0.18 (firmware release?)
 bLength: 9
 bDescriptorType: 4
 bInterfaceNumber: 3
 bAlternateSetting: 0
 bNumEndpoints: 3
  bulk-IN, bulk-OUT and Interrupt-IN
 bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
 bInterfaceSubClass: 0
 bInterfaceProtocol: 0
  bulk transfer, optional interrupt-IN (CCID)
 iInterface: SMC2
 CCID Class Descriptor
  bLength: 0x36
  bDescriptorType: 0x21
  bcdCCID: 1.10
  bMaxSlotIndex: 0x00
  bVoltageSupport: 0x01
   5.0V
  dwProtocols: 0x0000 0x0003
   T=0
   T=1
  dwDefaultClock: 4.000 MHz
  dwMaximumClock: 4.000 MHz
  bNumClockSupported: 0 (will use whatever is returned)
   IFD does not support GET CLOCK FREQUENCIES request: LIBUSB_ERROR_PIPE
  dwDataRate: 10752 bps
  dwMaxDataRate: 10752 bps
  bNumDataRatesSupported: 0 (will use whatever is returned)
   IFD does not support GET_DATA_RATES request: LIBUSB_ERROR_PIPE
  dwMaxIFSD: 1024
  dwSynchProtocols: 0x00000000
  dwMechanical: 0x00000000
   No special characteristics
  dwFeatures: 0x0004067E
   ....02 Automatic parameter configuration based on ATR data
   ....04 Automatic activation of ICC on inserting
   ....08 Automatic ICC voltage selection
   ....10 Automatic ICC clock frequency change according to parameters
   ....20 Automatic baud rate change according to frequency and Fi, Di params
   ....40 Automatic parameters negotiation made by the CCID
   ..02.. NAD value other than 00 accepted (T=1)
   ..04.. Automatic IFSD exchange as first exchange (T=1)
   04.... Short and Extended APDU level exchange
  dwMaxCCIDMessageLength: 1024 bytes
  bClassGetResponse: 0xFF
   echoes the APDU class
  bClassEnvelope: 0xFF
   echoes the APDU class
  wLcdLayout: 0x0000
  bPINSupport: 0x00
  bMaxCCIDBusySlots: 1
 idVendor: 0x0DB5
  iManufacturer: Access IS
 idProduct: 0x0184
  Can't get iProduct string: LIBUSB_ERROR_INVALID_PARAM
 bcdDevice: 0.18 (firmware release?)
 bLength: 9
 bDescriptorType: 4
 bInterfaceNumber: 4
 bAlternateSetting: 0
 bNumEndpoints: 3
  bulk-IN, bulk-OUT and Interrupt-IN
 bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
 bInterfaceSubClass: 0
 bInterfaceProtocol: 0
  bulk transfer, optional interrupt-IN (CCID)
 iInterface: SMC3
 CCID Class Descriptor
  bLength: 0x36
  bDescriptorType: 0x21
  bcdCCID: 1.10
  bMaxSlotIndex: 0x00
  bVoltageSupport: 0x01
   5.0V
  dwProtocols: 0x0000 0x0003
   T=0
   T=1
  dwDefaultClock: 4.000 MHz
  dwMaximumClock: 4.000 MHz
  bNumClockSupported: 0 (will use whatever is returned)
   IFD does not support GET CLOCK FREQUENCIES request: LIBUSB_ERROR_PIPE
  dwDataRate: 10752 bps
  dwMaxDataRate: 10752 bps
  bNumDataRatesSupported: 0 (will use whatever is returned)
   IFD does not support GET_DATA_RATES request: LIBUSB_ERROR_PIPE
  dwMaxIFSD: 1024
  dwSynchProtocols: 0x00000000
  dwMechanical: 0x00000000
   No special characteristics
  dwFeatures: 0x0004067E
   ....02 Automatic parameter configuration based on ATR data
   ....04 Automatic activation of ICC on inserting
   ....08 Automatic ICC voltage selection
   ....10 Automatic ICC clock frequency change according to parameters
   ....20 Automatic baud rate change according to frequency and Fi, Di params
   ....40 Automatic parameters negotiation made by the CCID
   ..02.. NAD value other than 00 accepted (T=1)
   ..04.. Automatic IFSD exchange as first exchange (T=1)
   04.... Short and Extended APDU level exchange
  dwMaxCCIDMessageLength: 1024 bytes
  bClassGetResponse: 0xFF
   echoes the APDU class
  bClassEnvelope: 0xFF
   echoes the APDU class
  wLcdLayout: 0x0000
  bPINSupport: 0x00
  bMaxCCIDBusySlots: 1