idVendor: 0x155B
  iManufacturer: BHDC
 idProduct: 0x8202
  iProduct: Reader-HHD02
 bcdDevice: 1.00 (firmware release?)
 bLength: 9
 bDescriptorType: 4
 bInterfaceNumber: 0
 bAlternateSetting: 0
 bNumEndpoints: 3
  bulk-IN, bulk-OUT and Interrupt-IN
 bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
 bInterfaceSubClass: 0
 bInterfaceProtocol: 0
  bulk transfer, optional interrupt-IN (CCID)
 Can't get iInterface string: LIBUSB_ERROR_INVALID_PARAM
 CCID Class Descriptor
  bLength: 0x36
  bDescriptorType: 0x21
  bcdCCID: 1.10
  bMaxSlotIndex: 0x00
  bVoltageSupport: 0x07
   5.0V
   3.0V
   1.8V
  dwProtocols: 0x0000 0x0003
   T=0
   T=1
  dwDefaultClock: 4.800 MHz
  dwMaximumClock: 4.800 MHz
  bNumClockSupported: 0 (will use whatever is returned)
   Got 1 clock frequencies but was expecting 256
   Support 4000 kHz
  dwDataRate: 12903 bps
  dwMaxDataRate: 412903 bps
  bNumDataRatesSupported: 0 (will use whatever is returned)
   Support 10752 bps
  dwMaxIFSD: 522
  dwSynchProtocols: 0x00000000
  dwMechanical: 0x00000000
   No special characteristics
  dwFeatures: 0x000200B2
   ....02 Automatic parameter configuration based on ATR data
   ....10 Automatic ICC clock frequency change according to parameters
   ....20 Automatic baud rate change according to frequency and Fi, Di params
   ....80 Automatic PPS made by the CCID
   02.... Short APDU level exchange
  dwMaxCCIDMessageLength: 271 bytes
  bClassGetResponse: 0x00
  bClassEnvelope: 0x00
  wLcdLayout: 0x0000
  bPINSupport: 0x00
  bMaxCCIDBusySlots: 1