idVendor: 0x32A3
  iManufacturer: GoTrust
 idProduct: 0x3201
  iProduct: Idem Key
 bcdDevice: 1.11 (firmware release?)
 bLength: 9
 bDescriptorType: 4
 bInterfaceNumber: 0
 bAlternateSetting: 0
 bNumEndpoints: 3
  bulk-IN, bulk-OUT and Interrupt-IN
 bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
 bInterfaceSubClass: 0
 bInterfaceProtocol: 0
  bulk transfer, optional interrupt-IN (CCID)
 iInterface: FIDO2 DEVICE
 CCID Class Descriptor
  bLength: 0x36
  bDescriptorType: 0x21
  bcdCCID: 1.10
  bMaxSlotIndex: 0x00
  bVoltageSupport: 0x02
   3.0V
  dwProtocols: 0x0000 0x0003
   T=0
   T=1
  dwDefaultClock: 4.000 MHz
  dwMaximumClock: 4.000 MHz
  bNumClockSupported: 0 (will use whatever is returned)
   IFD does not support GET CLOCK FREQUENCIES request: LIBUSB_ERROR_PIPE
  dwDataRate: 10752 bps
  dwMaxDataRate: 800000 bps
  bNumDataRatesSupported: 0 (will use whatever is returned)
   IFD does not support GET_DATA_RATES request: LIBUSB_ERROR_PIPE
  dwMaxIFSD: 254
  dwSynchProtocols: 0x00000000
  dwMechanical: 0x00000000
   No special characteristics
  dwFeatures: 0x00010330
   ....10 Automatic ICC clock frequency change according to parameters
   ....20 Automatic baud rate change according to frequency and Fi, Di params
   ..01.. CCID can set ICC in clock stop mode
   ..02.. NAD value other than 00 accepted (T=1)
   01.... TPDU level exchange
  dwMaxCCIDMessageLength: 271 bytes
  bClassGetResponse: 0x00
  bClassEnvelope: 0x00
  wLcdLayout: 0x0000
  bPINSupport: 0x00
  bMaxCCIDBusySlots: 1