idVendor: 0x1E0D
  iManufacturer: Neowave LinkeoC-PRO
 idProduct: 0x0014
  iProduct: LinkeoC-PRO
 bcdDevice: 1.01 (firmware release?)
 bLength: 9
 bDescriptorType: 4
 bInterfaceNumber: 0
 bAlternateSetting: 0
 bNumEndpoints: 3
  bulk-IN, bulk-OUT and Interrupt-IN
 bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
 bInterfaceSubClass: 0
 bInterfaceProtocol: 0
  bulk transfer, optional interrupt-IN (CCID)
 iInterface: CL
 CCID Class Descriptor
  bLength: 0x36
  bDescriptorType: 0x21
  bcdCCID: 1.10
  bMaxSlotIndex: 0x00
  bVoltageSupport: 0x07
   5.0V
   3.0V
   1.8V
  dwProtocols: 0x0000 0x0003
   T=0
   T=1
  dwDefaultClock: 3.685 MHz
  dwMaximumClock: 14.320 MHz
  bNumClockSupported: 0 (will use whatever is returned)
   Got 1 clock frequencies but was expecting 256
   Support 3685 kHz
  dwDataRate: 9909 bps
  dwMaxDataRate: 848000 bps
  bNumDataRatesSupported: 0 (will use whatever is returned)
   Support 9909 bps
  dwMaxIFSD: 254
  dwSynchProtocols: 0x00000000
  dwMechanical: 0x00000000
   No special characteristics
  dwFeatures: 0x000204BE
   ....02 Automatic parameter configuration based on ATR data
   ....04 Automatic activation of ICC on inserting
   ....08 Automatic ICC voltage selection
   ....10 Automatic ICC clock frequency change according to parameters
   ....20 Automatic baud rate change according to frequency and Fi, Di params
   ....80 Automatic PPS made by the CCID
   ..04.. Automatic IFSD exchange as first exchange (T=1)
   02.... Short APDU level exchange
  dwMaxCCIDMessageLength: 271 bytes
  bClassGetResponse: 0x00
  bClassEnvelope: 0x00
  wLcdLayout: 0x030E
    3 lines
   14 characters per line
  bPINSupport: 0x03
   PIN Verification supported
   PIN Modification supported
  bMaxCCIDBusySlots: 1
 idVendor: 0x1E0D
  iManufacturer: Neowave LinkeoC-PRO
 idProduct: 0x0014
  iProduct: LinkeoC-PRO
 bcdDevice: 1.01 (firmware release?)
 bLength: 9
 bDescriptorType: 4
 bInterfaceNumber: 1
 bAlternateSetting: 0
 bNumEndpoints: 3
  bulk-IN, bulk-OUT and Interrupt-IN
 bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
 bInterfaceSubClass: 0
 bInterfaceProtocol: 0
  bulk transfer, optional interrupt-IN (CCID)
 iInterface: CT
 CCID Class Descriptor
  bLength: 0x36
  bDescriptorType: 0x21
  bcdCCID: 1.10
  bMaxSlotIndex: 0x00
  bVoltageSupport: 0x07
   5.0V
   3.0V
   1.8V
  dwProtocols: 0x0000 0x0003
   T=0
   T=1
  dwDefaultClock: 3.685 MHz
  dwMaximumClock: 14.320 MHz
  bNumClockSupported: 0 (will use whatever is returned)
   Got 1 clock frequencies but was expecting 256
   Support 3685 kHz
  dwDataRate: 9909 bps
  dwMaxDataRate: 848000 bps
  bNumDataRatesSupported: 0 (will use whatever is returned)
   Support 9909 bps
  dwMaxIFSD: 254
  dwSynchProtocols: 0x00000000
  dwMechanical: 0x00000000
   No special characteristics
  dwFeatures: 0x000100BE
   ....02 Automatic parameter configuration based on ATR data
   ....04 Automatic activation of ICC on inserting
   ....08 Automatic ICC voltage selection
   ....10 Automatic ICC clock frequency change according to parameters
   ....20 Automatic baud rate change according to frequency and Fi, Di params
   ....80 Automatic PPS made by the CCID
   01.... TPDU level exchange
  dwMaxCCIDMessageLength: 271 bytes
  bClassGetResponse: 0x00
  bClassEnvelope: 0x00
  wLcdLayout: 0x030E
    3 lines
   14 characters per line
  bPINSupport: 0x03
   PIN Verification supported
   PIN Modification supported
  bMaxCCIDBusySlots: 1