idVendor: 0x0C4B
  iManufacturer: Reiner-SCT
 idProduct: 0x0300
  iProduct: cyberJack pinpad(a)
 bcdDevice: 1.00 (firmware release?)
 bLength: 9
 bDescriptorType: 4
 bInterfaceNumber: 0
 bAlternateSetting: 0
 bNumEndpoints: 3
  bulk-IN, bulk-OUT and Interrupt-IN
 bInterfaceClass: 0xFF
  NOT A CCID DEVICE
  Class is 0xFF (proprietary)
 bInterfaceSubClass: 0
 bInterfaceProtocol: 0
  bulk transfer, optional interrupt-IN
 iInterface: 0
 CCID Class Descriptor
  bLength: 0x36
  bDescriptorType: 0x21
  bcdCCID: 10.00
  bMaxSlotIndex: 0x00
  bVoltageSupport: 0x07
   5.0V
   3.0V
   1.8V
  dwProtocols: 0x0000 0x0003
   T=0
   T=1
  dwDefaultClock: 4.000 MHz
  dwMaximumClock: 8.000 MHz
  bNumClockSupported: 0 (will use whatever is returned)
   IFD does not support GET CLOCK FREQUENCIES request: Broken pipe
  dwDataRate: 10072 bps
  dwMaxDataRate: 250000 bps
  bNumDataRatesSupported: 0 (will use whatever is returned)
   IFD does not support GET_DATA_RATES request: Broken pipe
  dwMaxIFSD: 254
  dwSynchProtocols: 0x00000007
   2-wire protocol
   3-wire protocol
   I2C protocol
  dwMechanical: 0x00000000
   No special characteristics
  dwFeatures: 0x00010030
   ....10 Automatic ICC clock frequency change according to parameters
   ....20 Automatic baud rate change according to frequency and Fi, Di params
   01.... TPDU level exchange
  dwMaxCCIDMessageLength: 270 bytes
  bClassGetResponse: 0xFF
   echoes the APDU class
  bClassEnvelope: 0xFF
   echoes the APDU class
  wLcdLayout: 0x0000
  bPINSupport: 0x03
   PIN Verification supported
   PIN Modification supported
  bMaxCCIDBusySlots: 1